Did you know Waterproofing Integrity offers 20+ testing and inspection methods covering every surface, every stage and every failure mode on a waterproofing project?
Most of the industry knows one or two. Wet film gauge. Flood testing. Maybe Ultrasonic Thickness Testing.
On Monday, 24 August we are walking through the the essentials and what each method tests, when it applies, and which is right for your project.
We are not just presenting. We are demonstrating.
Part 1.
Presentation
Our expert team will present the complete method set — design compliance auditing, substrate verification, membrane integrity testing, facade diagnostics and remedial investigation and explain what each one finds, when it applies, and what the evidence looks like at handover.
Part 2.
Live Demonstration
Watch WI’s testing equipment in action. Electronic leak detection, ultrasonic membrane thickness testing and adhesion testing performed live so you can see exactly what these methods produce before you specify them on your project.
Our Services
01
Design
Catching the 35% of defects that start on the drawing board before a single membrane is laid.
02
Inspect
Stage‑by‑stage site inspection, independent of the installer, against design intent and standard.
03
Test
Non‑destructive ELD, flood testing, moisture scanning and more matched to the right method for the risk.
04
Remediate
Diagnosing root cause quickly so it’s fixed once, not patched and revisited.
WATERPROOFING INTEGRITY
Independent advisors. Not installers. Not suppliers.
Established in Sydney in 2019, we exist because the people advising on waterproofing were too often the ones installing it. We hold no ties to contractors or manufacturers so every method in this session is one we recommend on merit, not margin.
✓ 750+ projects designed for watertight performance
✓ 10,000+ independent inspections across Australia
✓ NATA‑accredited, non‑destructive ELD testing
✓ Independent of all installers, contractors and suppliers
What You’ll Gain
CPD Certificate
Whether attending online or in-person, you’ll gain a CPD certificate for 2 hours (1 CPD point).
Flowchart
Which tests apply at each stage: pre-installation, post-installation, diagnostic and handover
Support
Direct access to the Waterproofing Integrity expert consultants.
